Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
News

Home /  News

Operation Guide for Concrete Mixer Trucks

Sep.23.2024

Concrete mixer trucks are indispensable in any construction site with regard to concrete mixing and delivery. Proper operation of the vehicles is essential in order to increase productivity and adhere to the safety guidelines on the site. This manual will focus on providing operational procedures concerning concrete mixer trucks with emphasis on Trucklink.

Concrete Mixer Trucks Defined.

Concrete mixer trucks are vehicles that are used for the mixing and transportation of concrete. They are made up of a revolving drum mounted on a truck chassis that rotates the concrete mass in motion to avoid hardening. There is high demand among the construction suppliers for Trucklink's concrete mixer trucks and these are owing to their strength and efficiency and modern technology.

Customers Pre-Operation Inspection

Check Fluid Levels: Look for adequate levels of engine oil, coolant, hydraulic fluid and fuel.

Inspect Tires: Inspect tire pressure and tread depths and other factors to verify that it is safe to drive.

Examine the Drum: Look for any deterioration and any sparking from the mixing drum.

Test Lights and Signals: Make sure that all lights work properly, especially the brake lights and indicators.

Examine Safety Equipment: In some places, safety equipment, including fire extinguishers and first aid equipment, is available and within reach if needed.

After inspection has been completed, use the following steps to prepare the truck for start-up:

Get In The Cab Climb Safely: Get in the vehicle by making use of handrails and steps, ensuring three points of contact.

Buckle seatbelt: A seat belt should always be worn before starting the vehicle.

Start the Engine Ignition: Slot the key in the ignition and turn it to the right to start the engine. Do not drive without warming the engine.

Engage the Mixer Batching Plant: Switch on the mixer function to enable the drum to load with concrete.

The concrete is also poured into the following vehicle guided by the criteria when the drum rotates in the following way.

Positioning: Position under the concrete plant discharge chute/hopper.

Monitor the Load: Observe the loading of the drum so that the drum does not get over loaded with the aggregates.

Mixing: There is a smooth loading of the aggregates into the mixer and appropriate orientation of the load.

Driving the Concrete Mixer Truck

Driving a concrete mixer truck is very delicate in nature and there is need for extra cautious driving to be able to achieve the intended objective without accidents:

Traffic rules and regulations: All road traffic rules and speed limits must be obeyed.

Safe distance between vehicles: Keep a safe distance from other vehicles especially when loaded for effective and efficient stopping distance.

Be Caution When Taking Turns: Consider the height and weight of the truck, and make turns that are wide, avoiding any risk of tipping over.

Make Sure You Do Not Stop Suddenly: Stop with a slow pace, so that the concrete mix inside the drum will not be splashed.

Moving Out the Concrete

Prepare Effectively: Secure your truck on a firm surface and steer clear of any obstruction.

Use the Chute: Use the chute by pushing it so that concrete falls where it is required.

Turn on the Concrete Mixer: Press the mixing machine to position and discharge the concrete in a uniform manner as monitoring the concrete flow.

Post Delivery Cleaning: Upon completion of concrete delivery, it is important to wash the mixer drum and the chute to avoid concrete deposits.

Operating the concrete mixer truck, and especially the Trucklink, is not a casual exercise and most importantly safety measures must be strictly observed. This operation guide will help you to mix and deliver concrete effectively and safely at the work place.

Related Search